How to Choose the Right Materials for Clean room panel
Cleanrooms are critical in industries such as pharmaceuticals, biotechnology, and electronics manufacturing, where contamination control is critical. The choice of clean room panel material can significantly affect its performance, compliance, and service life. Choosing the right cleanroom panel material is an important measure to ensure that the cleanroom can perform its performance properly.
The Classifications and requirements of clean room panel
Different industries have different cleanliness levels and requirements for cleanroom panels. Only after determining the conditions of the cleanroom can we choose the appropriate cleanroom panel.
According to industry standards, cleanroom panels should meet ISO 14644-1 air cleanliness standards. Industry-specific requirements include FDA-compliant materials for pharmaceuticals and ESD-safe materials (e.g., conductive coatings) for electronics. The aerospace industry should use materials that meet fire protection standards (such as UL 94) and minimize particle generation.
Clean room Panel Cleanliness and Contamination Control
To ensure cleanliness and pollution control, non-porous surface wall panels should be selected, so stainless steel sandwich panels and aluminum sandwich panels will be more widely used. Known for its corrosion resistance and strength, stainless steel is a popular choice. Its smooth surface minimizes particle accumulation and is easily cleaned and sanitized. Materials such as polyurethane or fiberglass reinforced plastic are heavy and easy to clean and can be used as core materials.
Clean room panel fire resistance and structural integrity
Some clean rooms have certain requirements on structural integrity and excellent fire resistance. In terms of fire resistance, rock wool clean room panel and glass magnesium hollow clean room panel have greater advantages. Their fire resistance time can reach 120 minutes or even more, and the structural strength of rock wool and glass magnesium board can ensure the structural integrity of the clean room. The use of PPGI or stainless steel materials can further enhance the structural performance of the clean room panel.
Clean room panel that are easy to install and maintain
We will choose a modular solution for easy-to-install clean panels and draw modular drawings based on the needs of the clean room, and handmade clean panels are a must. Ensuring that the material can withstand frequent cleaning and will not age will reduce the trouble of enclosure, so stainless steel clean panels and aluminum honeycomb panels are more suitable. Aluminum honeycomb panels are not only easy to maintain, but also have certain fire resistance and sterilization resistance.
Cost factors of clean room panel
Cost factor is considered in every project. For different levels of clean rooms, different clean boards need to be selected. For low-level clean rooms, EPS clean board is a cheap choice. EPS clean board is very light and has good heat insulation and low water absorption. In addition, Paper Honeycomb Panel is also an inexpensive choice. Paper Honeycomb Panel has good fire resistance and good aesthetics, so Paper Honeycomb Panel will be used as the material of clean room doors.
Based on the above factors, we can choose the corresponding clean board according to the situation of the project to ensure the normal operation of the clean room.
